Measuring parts

Before replacing any parts, I’ve measured the parts to assess what I needed…

meas-big-end.jpg

Ford’s tolerances: 47,64 to 47,66mm

meas-crank.jpg

meas-cam-base.jpg

meas-cam-heel-to-toe.jpg

That’s 5,17mm of cam lift (should be 6,13…)!

This entry was posted on Tuesday, October 9th, 2007 at 1:47 am and is filed under 2- Before. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Leave a Reply